Depending on the routing capabilities of your fax board, you can configure the following routing methods:
| • | Direct inward dial (DID) - If your environment supports DID hardware, FACSys will deliver a fax as defined by the user or group DID identification. For instructions on configuring a board for DID routing. |
| • | Dual tone multi-frequency (DTMF) - If your environment supports the DTMF hardware, FACSys will deliver a fax as defined by the sender's DTMF identification. For instructions on configuring a board for DTMF routing, |
| • | Line (channel) routing - FACSys can also deliver faxes according to the channel on which they are received. Inbound faxes can be routed to a FACSys user or to a network printer. For instructions on configuring a board for line routing. |
