Defining Device Advanced Properties

Previous  Top  Next

Advanced fax board configuration options include speed settings, dialing settings, and several additional options specific to the capabilities of each modem.  
To define the properties for a fax device, select the device listed in the Devices folder and click the Properties toolbar button. The device Properties dialog box is opened.  
 
To define or modify advanced settings for the fax device, click the Advanced tab in the device Properties dialog box.  
 
Device Communications
 

Modem Speed: The Modem Speed is the speed at which the device operates and reflects the speed at which the fax files will be transmitted.

 

Host Speed: The Host Speed option is only available for serial modems and reflects the speed at which the PC will communicate with the fax board. For serial fax devices (Class 1, 2, 2.0), the Host Speed must be faster than the Modem Speed. You should select a Host Speed that is at least two times the Modem Speed. For example, if your Modem Speed is 9600, then choose a Host Speed of 19200. If your Modem Speed is 14400, then choose a Host Speed of 38400.

 

emFAST will NOT support Class 1, 2, 2.0 modems in Production environments.

   
The Device Settings you define are specific to the capabilities of the device. Refer to the manufacturer's documentation for detailed specification